NDT Equipment’s & Accessories Supply
Radiography / X-ray Testing Accessories
Sentinel Model 880 Delta, 880 Elite and 880 Omega Source projectors are portable Lightweight and compact industrial radiographic exposure devices, The Patented device Body consists of a titanium ‘S’ tube and cast depleted uranium (DU) shield contained within 300 series stainless steel tube with stainless steel discs welded at each and forming a cylinder shaped housing The discs are recessed to provide protection for the rear Mounted locking mechanism and front mounted outlet port.
Range : 0-1999.9mR
Display : Digital
Operation range: (0-5mR, 0-50mR, 0-500mR, 0-5R)
Display: Analog
Make: Arrow – Tech
Range: 0-200 mR
Range: 0-500 mR
Range: 0-5R
Made of stainless steel for picking up unshielded radioactive source pencil / source holder
- Length 1.0 mtr
- Length 1.5 mtr
- Length 2.0 mtr
Provides highly repeatable and accurate measurements of black and white film densities. large LED numerals can be read easily in bright or dim light.
product features
- Measuring range: 0.5 0D with 2 and
- 3mm apertures: 0-4.0D
Available in wire length: 50 mm 25mm 10mm (2”,1”,3/8”) material: Standard stainless Steel (for all steels), Aluminium, Copper (Nickel, Inconel, Titanium available upon Request) A} WIRE TYPE 1QI’S AS PER EN - 462 - 11 FE EN, 6FE EN, 10 FE EN, 13FE EN B} WIRE TYPE 1QI’S AS PER EN - 747 Set A, Set B, Set C, Set D C} WIRE TYPE 1QI’S AS PER BRITISH STANDARDS BS - 379 D} WIRE TYPE 1QI’S AS PER IS - 3657 FE - 1, FE - 2, FE - 3, FE - 4, FE - 5
We manufacture and supply Directional / Panoramic type of collimators in either Lead or Tungsten for different types of Projectors.
- Directional: Dia 60mm / 50mm
- Panoramic: Dia 60mm / 50mm
STYLE: SINGLE, 3 IN 1 Size (Inches) 14x17, 12x15, 6x15, 4x15, 4x10, 3x15, 4x7.5, 3x7.5, 4.5x17, 3.5x17 (and Special Makes)
This Alarm lamp is Rechargeable battery-operated, small in size and is manufactured from light and durable ABS plastic. It can be operated for 8 hours with one charge. Features - Lengthening battery life with flickering alarm lamp Visible at a 2km distance at night Rechargeable battery Easy to use
This Alarm beacon lamp is battery-operated, small in size and is manufactured from light and durable plastic. It can be operated for AA Battery 04 Nos. Features - Visible at a 2km distance at night Easy to use
Standing type A4 Size Reflection Sticker
Plastic Lead Letter & Number Box Reliable & durable Long life
Flexible Yellow Barricade Tape For Radiation Boundary Area
Safety Aprons for radiation workers (More details in the specification sheet)
Finest quality Lead screens duly lacquered for longer life. Flexible with plastic sheet, backing - for longer life pairs of front and back screens.
Thickness of Front / back Screen Size: 0.125mm (0.005”), 0.25mm (0.010”) Available Sizes in cm: 30x40,15x40, 10x40, 7.5x40, 10x20, 7.5x20 Available sizes in Inches: 14”x17”, 12”x15”, 6”x15”, 4”x15”, 3”x15”, 4”x71/2”, 4”x5”
Made of flexible PVC Sheet of thickness 0.25mm. Double Envelop type cassettes (Inner/ Outer) Folding type cassettes (provided with Velcro seal)
High intensity Illuminator are available in several models for viewing radiographic films All film viewer are capable of viewing films of minimum density 4.0
Lead Letters: A-Z Lead Numbers: 0-9 Size available: 5mm, 7mm, 10mm 12mm, 19mm (3/16”, ¼”,3/8”½”,¾”)
Dark Room Temperature Measuring Thermometer. Digital Thermometer with Probe. Glass Type Thermometer.
Lead container used for storing the radioactive source pencil /pig tall.
To cover unprotected radioactive source to reduce scattered radiation during accidents. Size available (2mm to4mm mix.): Bags of 1kg., 5kgs. or as per order
Ultrasonic testing
Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking Dimensions: 25.0 mm x 100.0 mm x 300.0 mm Alloy: 1018 Steel, ss , aluminum, stainless steel Nickel-plated.
V2 Small Calibration Block for On-site Checking Of Miniature Shear Wave Probe Index, Time Base, Beam Angle and Gain. From 35 To 75 Degrees. In Accordance With Standards. Made From: 1018 Steel, Aluminum & Stainless Steel
V2 Small Calibration Block for On-site Checking Of Miniature Shear Wave Probe Index, Time Base, Beam Angle and Gain. From 35 To 75 Degrees. In Accordance With Standards. Made From: 1018 Steel, Aluminum & Stainless Steel
AWS-type block used for shear wave distance calibration. Contains a 25.0 mm radius overlaying a 50.0 mm radius on a 180° segment. In accordance with ASTM E164 and BRR/AWS X-1 specifications.
Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements. Dimensions: 305mm x 75mm x 50mm Made from carbon steel Fitted wooden storage case. optional
AWS-type block used for longitudinal distance and sensitivity calibration
Contains a 2.0" high section between two 4.0" sections.
In accordance with AWS requirements.
Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD) and signal amplitude. All blocks have the same size flat-bottom hole and varying MTD. Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”). In accordance with ASTM E428.
This block contains (9) 1/16" diameter thru-holes located from 0.100" to 0.900" from the scanning surface. Nominal location is laser engraved on the side of the block.
Dimensions: 1.000" x 1.000" x 10.000" Made from 1018 Steel, Nickel plated.
Blocks can be made in most alloys, including exotics.
Thickness and linearity calibration. These Various Step block is the metric "A" version. Variations of this block are available if additional steps are preferred. Also, larger step faces are offered for use with large diameter transducers. In accordance with ASTM E797. Also 90° Curved Step block is machined from solid 2" diameter bar with Various step thicknesses. Materials: carbon steel, Aluminum, SS
Single Element Contact Transducers are longitudinal wave transducers designed for general purpose manual ultrasonic inspection where test materials are relatively flat and smooth. Contact transducers provide high sensitivity for better penetration and are ruggedly constructed for extended service life under the roughest testing conditions.
Magnetic Particles Testing
Choice of constant level AC or variable intensity, pulsed Sold state circuit for infinitely variable (step less) potentiometric adjustment of DC magnetic field. Articulated legs to suit differing component contours. Interpole distance adjustable from 0 to 300mm. Low power consumption/ Current draw at 220v, single phase-only 2amps. Strong and intense magnetic field for superior sensitivity Portable & light weight - only 1.5 kgs.
It a ideal for the effective magnetization of components for crack detection, particularly where the use of electromagnetic yokes is impracticable or prohibited for safety reason. The hinged arms and rotating pole pieces facilitate the local inspection of a diverse range of components such as Critical welds in structures of fabrications, castings and automotive components.
Used to provide a guide to the strength of the magnetic field at the precise point of their location
Used to establish direction of magnetic field.
The TB-10 Magnetic Weight Lift Test Bar Provides for the calibration and certification of magnetic particle
Used to check for magnetism before testing, Check the polarity of a Field Check Residual Magnetism after De-magnetizing.
Pocket gadget to measure Visible / UV light intensity
The aluminum comparator block is an aluminum test piece of 80 х 50 х 10 mm, divided into two equal parts by a notch (50 х 2 х 1.5 mm). The Aluminum Comparator Block is used for checking the quality of penetrant in use. One half of the block is sprayed with penetrant being used, and the other half is sprayed with fresh penetrant for effective comparison.